• 2.2A power supply
• 32 true partitions…separate or shared from other partitions. User access from any keypad, dependent on partition assignment
  • True independent partitions
  • Individual bell outputs, access codes, entry exit timers, zone, etc.
• 16 main board zones expandable to 256
  • Expandable with 30 PC6108 modules
  • DEOL supervision
  • 16 main board zones

• 64 LCD Keypads  on the system
• 2 hardwired LCD keypads
  - PC6501 alphanumeric LCD keypad
  - PC6501T alphanumeric LCD keypad with tamper

• 210 pgm output
• Up to 66 high current outputs…2 on main panel plus :
  PC6204 - 4 relay power supply module…add up to 16 modules
  PC6216 - 16 low current output module…add up to 9 modules

• Up to 32 access-controlled doors using up to 16 PC6820 modules

• 2 programmable outputs…each output can be programmed for 1 of 56 PGM output options
• 1 supervised programmable bell/siren output
• 1 12VDC switched programmable auxiliary power supply
• High and low battery charging current
• 4-wire connection to Ebus (communication bus) - for easy connection of modules
• 3-wire connection for Backbone communication bus - for addition of PC644X modules
• 3000 event buffer…2500 events can be viewed through the keypad, including date and time stamp
• 4 user types…Basic, Advanced, Supervisor, Master
• Zone types include:
  - standard delay
  - momentary arm
  - force arm delay
  - maintained arm
  - auxiliary delay
  - 24hr holdup
  - instant
  - auxiliary
  - interior
  - 24hr auxiliary
  - 24hr bell
  - 24hr medical
  - 24hr bell/buzz
  - seismic
  - 24hr buzzer
  - LINKS supervisory
  - standard fire
  - LINKS answer
  - auto verify

• Both 6010 and 6204 have a 2.2A power supply
• PC6010 can provide up to 1.7A
  of Aux. output current
• PC6204 can provide up to 1.5A
  of Aux. output current\Both PC6010 and PC6204 support up to 1.4A
  of battery charging current

• Communicates using the SIA
  or Contact ID formats
• Links1000/GSM1000 cellular communication
• 32 account codes
• 1000 users

• Alphanumeric LCD display
• With new E-Z Prompt user flow, prompts user with simple questions
• Built-in piezo buzzer
• Full annunciation of zones and system status
• Up to 16 keypads on system
• Maximum current draw of 55mA (from Ebus) 90mA with backlighting boost
• Dimensions : 5.5" x 4.5" x 1" deep (150 x 114 x 25mm)

The PC6010 is easily expanded by adding PC6108A modules via 4 wire communications bus (Ebus).

• 8 zone expansion module
• Add up to 30 modules for total of
  256 zones on the system
• Supports DEOL zone loops
• Nominal current draw of 30mA
• AUX Output: 12VDC, 250mA max.
• Supervised for tamper
• Low Ebus supervision

• 2.2A power supply Supports high and low battery charging current (1.4A or 360mA)
• Up to 16 modules on system (up to 64 high current outputs)
• Output current: 1A, 12VDC
• Each output programmable for 1 of 56 options
• Minimum 80VA 16-18 volt transformer required
• Minimum 4Ah battery required, up to 36Ah max.
• AUX current: 680mA max. high battery charge 1.7A max.
• Low Ebus supervision
• 4 programmable relay contacts
• Supervised for tamper and troubles (low battery, AC trouble, etc.)
• Latching output option

• 16 outputs per module – 9 modules per system
• All 16 outputs can be programmed on each module, 1 of 56 options each
• Nominal current draw of 15mA plus power required by outputs
• Output current: 50mA, 12VDC
• Low Ebus supervision
• Supervised for tamper
• Latching output option

• Baud rate – 4800
• RS-232 protocol
• Connects to panel via 4-wire Ebus
• Supervised for tamper and off line trouble

• High speed 2 way communication port module for customized applications
• 115.5K Baud access
• 1.5Amp power supply with battery backup
• AUX current: 50mA
• Connects to panel via Backbone
• 720mA battery charging current
• 1 of each module per system

• 2 programmable supervised zones
• Zones may be programmed:
  Standard
  Force Arm Delay
  Auxiliary Delay
• Up to 16 PC6820 modules can be added (up to 32 access points)
• Does not lose any system programming when module is powered down
• 6 low current outputs
  2 LED terminals (to the LED input of the reader)
  2 BUZ terminals (to the buzzer input of the reader)
  2 OUT terminals
• Auxiliary output supply: 12VDC, 125mA max.
• LK1/LK2 door strike power: 12VDC, 250mA max.
• Reader power: 5VDC, 125mA max.
• Reader power: 12VDC 125mA max.
• Battery required – 12VDC 7.0Ah recommended rechargeable lead acid
• Transformer required – 16.5VAC, 40VA
• Output Voltage – 13.8VDC (with normal AC and fully charged battery)
• 720mA battery charging current